The problem is either a physical connection or configuration issue. Paper Cassette Feeder Please contact Technical Support to discuss the options available to correct this. If not corrected — contact Technical Support. Also, make sure that the media is aligned properly when loaded in the tray. Make sure that you can push this down and it springs back into place. To correct this, pull the toner cartridge from the printer and check the metal contacts on the left side of the printer.
|Date Added:||18 April 2006|
|File Size:||51.84 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Make sure the printer has been rebooted after changing IP parameters.
SCANNER is displayed when the laser unit is not level, a bad connection is detected by the sensor or the scanner motor has stopped moving.
Optional Paper Feeders FUSER is displayed when the temperature sensor inside the fuser does not read the correct temperature too high or too low.
Xanté Accel-a-Writer 3N – printer – monochrome – laser Overview – CNET
Warranty And Service Options The Accel-a-writer 3 Series Printers Preventing Paper Jams Connecting The Power Cord Make sure that you can push this down and it springs back into place. Please contact Tech Support if you are not familiar with performing this adjustment.
The best tool for this is an Ethernet cross-over cable, a cable that connects two devices directly without the need for a hub or switch. Calling For Technical Support Turn off the printer for 30 minutes and restart. Acccel And Setup Issues Engine tolerances for this printer are plus or minus 2 mm. If these values are entered manually instead of through DHCP z the DHCP setting on the printer must be turned off in order for the settings to apply.
Gently pull this out to ensure contact.
Xante Accel-a-Writer Accel-a-Writer 3N Manuals
Reassembling The Printer Packing The Printer Please contact Technical Acel to discuss the options available to correct this. Connecting To The Localtalk Port It has two beige handles.
Check to see if the skew occurs from all trays or only one tray. Internal Ide Hard Disk Upgrade Installing The Paper Cassette Feeder You may need wruter take this roller out and clean it.
On the right side, following the guide for the toner you will notice another contact, which is the ground.
Cacel Double-sided Copy Printing On Custom Sized Media Make sure that it is not pushed in to where it does not make contact with the toner. Make sure that you get it seated properly. Paper Handling Options About This Manual Transfer Roller Cleaning Writr And Product Registration On occasion, the sides of the toner cartridge not making good contact can also cause the problem.
Turn off the printer for 30 minutes to allow fuser to cool and restart.